700 MHz UHF Vertical Outdoor Base Antenna (769-775 MHz)
|Gain: 6 dBi||SWR: 1.5:1 or Less on Center||Pattern: Omni-directional|
|Wavelength: Multiple 1/2||Tuned: 769-775 MHz||Band: 700 MHz Safety|
|Connector: N Female||Cable: RG8X||Cable Length: 24 Inches|
|Height: 57"||Width: 1 1/4"||Weight: 1 lb 11oz|
|Wind Area: 0.50 Sq Feet|
Ready Made: There's no assembly necessary, or extra mounting parts needed.
Tuned for 700 MHz Public Safety: Each antenna is designed to be used for the new 700 MHz Public Safety base band of: 769 to 775 MHz. This would cover such systems as: Pennsylvania P25, Maryland FIRST, Idaho ICAWIN, New Jersey PSIC, Massachusetts Metro Boston, San Bernardino Co. P25, New York City DoITT, NJ Monmouth Co. PS, NJ Somerset Co. P25, Illinois STARCOM, CA State Parks, CA San Mateo Co. P25, Portland OR P25, Delaware DELWIN, AK Anchorage ALMR, Phoenix RWC, and many others. This antenna will also work well for the new CHP 700 MHz frequencies.
No Ground Plane Needed: A metal ground plane is not needed with this design.
Enclosed Elements: The actual antenna elements and feed point are sealed inside a UV resistant plastic radome. No need to worry about corrosion on the elements with this design. This design also helps control friction induced static, which can be created by wind and dust.
Weather Resistant: Having the elements and feed point sealed in the radome allows the antenna to be very resistant to weather and other environmental damage. This antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environment.
Brass Elements: The inner elements are made from brass, which is a better element material than stainless steel.
Narrow Bandwidth: The bandwidth for the antenna is fairly narrow, which can help to eliminate intermod problems from adjacent strong signals in urban areas.
High Quality N Connector: Instead of the usual UHF connector that's included with most antennas, this antenna includes a 50 ohm female N connector, on the end of a small cable pigtail. N connectors are more water resistant and handle high frequencies better. Note: Due to the high frequency that these systems operate at, and the potential losses that can occur through cable, it is highly recommended that at least an RG8 size coax cable be used. Need help choosing your main cable? Checkout the Coax FAQ.
Includes Mounting Hardware: Price includes mounting clamps to allow attaching the antenna to any standard 1 1/4" to 1 1/2" mounting mast.
Made exclusively by DPD Productions in the USA
Do you also need cable or coax sealing tape? Try the: Cable & Accessories Page.