Mil VHF Vertical Outdoor Base Antennas
Please make sure you pick either the 138-143 MHz version, or 148-149 MHz version, from the menu above.
|Gain: 3 dBi||SWR: 1.5:1 or Less on Center Frequency||Pattern: Omni-directional|
|Wavelength: 1/2||Elements: 1||Tuned: 138-143 or 148-149 MHz|
|Band: VHF Mil||Connector: N Female||Cable: RG8X|
|Cable Length: 12 Inches||Height: 67"||Width: 1 1/4"|
|Weight: 1 lb 11 oz||Wind Area: 0.50 Sq Feet|
Readymade: There's no assembly necessary, or extra mounting parts needed.
Tuned to Mil VHF Band: Each antenna is tuned to the Mil VHF Band from 138-143 MHz. There is also a 148-149 MHz version. These models can be utilized in Civil Air Patrol and MARS activities.
DC Grounded: A metal ground plane is not needed with this design.
Enclosed Elements: The actual antenna elements and feed point are sealed inside a UV resistant plastic radome. No need to worry about corrosion on the elements with this design.
Weather Resistant: Having the elements and feed point sealed in the radome allows the antenna to be very resistant to weather and other environmental damage. This antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environment.
Copper Elements: Elements are copper clad, which is a better element material than stainless steel.
Narrow Bandwidth: The bandwidth for the antenna is fairly narrow, which can help to eliminate intermod problems from adjacent strong signals in urban areas.
High Quality N Connector: Instead of the usual UHF connector that's included with most antennas, this antenna includes a 50 ohm female N connector, on the end of a small cable pigtail. N connectors are more water resistant and handle high frequencies better. Need help choosing your main cable? Checkout the Coax FAQ.
Includes Mounting Hardware: Price includes mounting clamps to allow attaching the antenna to any standard 1 1/4" to 1 1/2" mounting mast.
Made exclusively by DPD Productions in the USA
Do you also need cable or coax sealing tape? Try the: Cable & Accessories Page.