Y-Type Chimney Antenna Mount
This kit includes everything you should need to mount a standard 1 1/4" diameter TV mast tube, to the top corner of a square or rectangular house chimney. This kit combined with a mast (not included) will mount any of the DPD Productions vertical base, or omni base antennas. (Please measure and total all four sides of your chimney, to make sure the supplied 18 feet of banding will be enough.) Included in the kit...
- 2x Y Brackets
- 4x Eye Bolts
- 2x 18 Foot Rolls of Metal Band
- 4x Band Crimp Clamps
- 2x U-Bolts
- 8x Nuts
Please Note: It is highly recommended that a mast no longer than 5 feet be used on this mount, without utilizing guy wires. The Y brackets should be separated vertically by at least one foot. This setup should not be used on a chimney where the fireplace will actually be used. The heat and smoke will likely damage the antenna. Use good judgment when mounting an antenna on a roof. Stay away from power lines, and do not work on the antenna when electrical storms are in the area. If you have any doubt about being able to safely work at height, find a professional to help you.
*These Components are Produced Outside the USA
