4-Inch Mast Wall Mount

4-Inch Mast Wall Mount

  • $32.95


This kit includes everything you should need to mount a standard 1 1/4" diameter TV mast tube, to a wood structure wall. This kit combined with a mast (not included) will mount any of the DPD Productions vertical base, or omni base antennas. (These brackets will create a 4 inch standoff distance from the mounting surface.) Included in the kit...

  • 2x Standoff Brackets
  • 2x Saddles
  • 4x Lag Bolts
  • 4x Wood Screws
  • 4x Locking Washers
  • 4x Nuts

Please Note: It is highly recommended that a mast no longer than 5 feet be used on this mount, without utilizing guy wires. The brackets should be separated vertically by at least one foot. Make sure the wood screws enter solid wood to their full depth... NOT plaster, plywood, or any other thin surface material. This setup should not be used on a chimney where the fireplace will actually be used. The heat and smoke will likely damage the antenna. Use good judgment when mounting an antenna on a roof. Stay away from power lines, and do not work on the antenna when electrical storms are in the area. If you have any doubt about being able to safely work at height, find a professional to help you.

*These Components are Produced Outside the USA


We Also Recommend