Custom Vertical Outdoor Base Antenna
Note: When checking out, please enter the frequency you would like the antenna tuned to (between 137 and 510 MHz) in the 'Special Instructions' field.
|Gain: 3 to 4 dBi||SWR: 1.5:1 or Less||Pattern: Omni-directional|
|Wavelength: 1/2||Elements: 1||Tuned: To Order|
|Band: To Order||Connector: N Female||Cable: RG8X|
|Cable Length: 12 Inches||Height: To Order||Width: 1 1/4"|
|Weight: To Order||Wind Area: To Order|
Readymade: There's no assembly necessary, or extra mounting parts needed.
Custom Tuned: Each antenna can be built to a requested frequency or band between 137.0 and 460.0 MHz.
Enclosed Elements: The actual antenna elements and feed point are sealed inside a UV resistant plastic radome. No need to worry about corrosion on the elements with this design.
Weather Resistant: Having the elements and feed point sealed in the radome allows the antenna to be very resistant to weather and other environmental damage. This antenna is strong enough to withstand an ice storm, and will also do well in a shoreline environment.
Copper Elements: Elements are copper clad, which is a better element material than stainless steel.
Narrow Bandwidth: The bandwidth for the antenna is fairly narrow, which can help to eliminate intermod problems from adjacent strong signals in urban areas.
High Quality N Connector: Instead of the usual UHF connector that's included with most antennas, this antenna includes a 50 ohm female N connector, on the end of a small cable pigtail. N connectors are more water resistant and handle high frequencies better. Need help choosing your main cable? Checkout the Coax FAQ.
Includes Mounting Hardware: Price includes mounting clamps to allow attaching the antenna to any standard 1 1/4" to 1 1/2" mounting mast.
Made exclusively by DPD Productions in the USA
Do you also need cable or coax sealing tape? Try the: Cable & Accessories Page.